Product Categories
Product Tags
- Bracket
- Clamp Fitting
- Coupling Fitting
- Fitting
- Manifold
- Manifold Box
- Manifold Box Manifold
- PE 100
- PE 80
- Pipe
- Press Fitting
Technical specifications
Polyethylene foams are produced in the thicknesses of 0.5 to 35 mm in the form of sheets and in the thicknesses of 40 to 120 mm in the shape of mats. These insulators are capable of being laminated with a variety of aluminum foils, metalized coat, polymer films and PVC.
The product is also available in the sizes of 2 to 3.8 inches in the form of pipe foams.
EPE technical specification
Density (ASTM D3575-W) | 25 Kg/m |
Compression set (ASTM D3575-B) | 29% |
Thermal conductivity coefficient (ASTM C335) | 0.035 W/m °K |
Water absorption (ASTM D3575-L) | 0.107 Kg/m2 |
Tensile strength (ASTM D412) | 0.2 MPa |
Linear expansion (ASTM D412) | 75% |
Thermal tolerance | 70 °C |
Polyethylene cross-linked XPE foams
Polyethylene foams are produced in the thicknesses of 0.5 to 35 mm in the form of sheets and in the thicknesses of 40 to 120 mm in the shape of mats. These insulators are capable of being laminated with a variety of aluminum foils, metalized coat, polymer films and PVC.
The product is also available in the sizes of 2 to 3.8 inches in the form of pipe foams.
XPE technical specification
Density (ASTM D3575-W) | 30-200 Kg/m3 | Thermal tolerance | 90 °C |
Compression set (ASTM D3575-B) | %20< | Flammability (DIN 4102) | Class B2 |
Thermal conductivity coefficient (ASTM C335) | 0.033 W/m°K | Water vapor permeability (WVP) | 0.003 mg/hmPa |
Water absorption (ASTM D3575-L) | 0.03 Kg/m2 | Water vapor resistance factor | 6.788 mm2Pa/mg |
Tensile strength (ASTM D412) | 0.3 MPa | water vapor permeability index | 0.169 mg/ hm2Pa |
Linear expansion (ASTM D412) | 110% | Water transmission rate | 204.26 mg/hm2 |
Product Tags
- Accessory Fitting
- Bracket
- Clamp Fitting
- Coupling Fitting
- Fitting
- Manifold
- Manifold Box
- Manifold Box Manifold
- PE 100
- PE 80
- Pipe
- Press Fitting
see our